There are many types of iris film, colorful film, transparent film, translucent film, laser iris film and so on. It is generally used to decorate the glass film, but also used on other smooth surface decoration materials. Let me talk about it below: What is the method to paste the rainbow film?
Step 1:
The method of rainbow film paste is to apply water paste on a smooth surface. The preparation tools are: a paper knife or utility knife, a small spray bottle, a scraper or card board, a clean rag, and a steel ruler.
Step 2:
Measure the size of the doors and windows to be posted, and choose the size of the rainbow film according to the measured size. The size of the rainbow film must be larger than the doors and windows or other decorative panels to be pasted.
Step 3:
When preparing the tools, you can buy or use the household cleaner spray can, the scraper card can use the household fee bank card, etc.; then first spray the glass surface to be pasted with diluted detergent, wipe it with a rag, and then Spray the glass surface with clean water and wipe it clean, and then spray water evenly.
Step 4:
Then, after preparing the rainbow film, tear off the bottom layer from one corner and pull it down evenly. After pulling out one side, align it with the upper edge of the glass to be pasted, and press the upper edge with your hand to continue downward slowly Tear it, tear it from the top to the bottom and press until it is finished, and then scrape it from top to bottom with a card to glue the rainbow film and the glass together.
Step 5:
That is, scrape out all the bubbles between the glass and the film. After it is completely pasted, use a utility knife or a paper knife to trim the edges neatly. When cutting, it is best to use a steel ruler to lean against the other side of the blade. The cut edge is relatively straight. After cutting, wipe the periphery with a clean cloth.
Know more about the glass film: https://www.sinovinyl.com/product/holographic-rainbow-window-film/
