Tools: rag, watering can, squeegee with fabric
1. Clean the body and spray water evenly on the body part that needs to be pasted-reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. Determine where you need to publish. Paste it slowly, scrape it lightly with a tool, and uncover the backing paper.
3. Make proper adjustments, after determining the approximate position of the figure, repeatedly scrape off the water and air bubbles. Tear off the transparent backing paper.
4. Don’t let the car sticker and the body have any separation or protrusion.
5. Try to let the moisture in the car sticker dry, and if possible, heat it and dry it appropriately.
Note: Do not wash the car within 3 days after applying the film, and do not apply it on cloudy or rainy days, otherwise the effect will not be good.