Car window film can effectively improve the impact resistance of the glass, and even the impact of ordinary stones or blunt objects can effectively resist, avoiding secondary damage caused by glass fragmentation. Especially in the process of driving, we will inevitably be impacted by some small flying stones from time to time, and in the process of high-speed driving, some seemingly small particles can also produce amazing impact. If our car glass does not have a film It is easy to break directly, and the “impact object” may directly penetrate the glass and injure the occupants, so the car film is very necessary. So how to wrap car window film?
1. Try not to lift the film when we put on, due to fibers and particles will sticky for lifting, please try to avoid it. The adhesion of the car film to the glass will also be reduced. We use The wiper must be wiped and cleaned once to avoid any traces of dust. Then we will tear off the outermost layer of transparent plastic to avoid evaporation to other inner layers.
2. Choose a certain enclosed space, and try not to use fiber towels and cotton clothes to avoid static electricity. Next, we have to prepare a lot of water, and this water is filtered. We have to spray a little water on the pasted glass, wipe it clean, and then tear off the transparent plastic of the film. Take it slowly when you tear it off. Avoid generating static electricity to attract dust. At this time, try not to open the door, and don’t turn on the air conditioner when we stick the film, because the dust in the car will fly everywhere.
3. The car glass film is to be affixed to the inside of the glass.But tactually just put the film on the outside of the glass and cut it according to the shape of the car window so that the cut film can be attached to the inside of the glass later.
4. The car film seems to be very simple, but in fact, if you do not master the method, it will only waste materials and even damage the car glass that we must pay attention to every step when applying the film
