1. First of all, we can use fingernails or hard cards like bank cards to lift one corner of the headlight film, and if it still doesn’t work, we need to use a wallpaper knife.
2. Then you can tear off the film slowly. Of course, if you want to speed up, you can tear off the film with the heat of the heat gun, because the viscosity of the glue can be reduced a lot after heating.
3. When the headlight film is torn off, there may be some residual adhesive attached to it. At this time, we can use alcohol to remove it, and of course, clean it with water.
Know more about the headlight film: https://www.sinovinyl.com/product/chameleon-headlight-tint-film/
