HOW TO APPLY IT
Cut: Set the cutter automatically or with the data you design, put on a cutting mat that has a sticky back and kiss-cut the design by your cutting machine.
Weed: Use a weeding tool to remove the excess part around your design, only leave the pattern part you need.
Transfer: Gently put a transfer label on the surface of the cut vinyl design, use a scraper to rub over the design and make sure the transfer label is adhering to the design nice and tight.
Apply: Adhere it to the new clean and dry surface, rub the transfer label from center out to adhere the design securely, slowly and carefully remove the transfer label, then the delicate design is finished.
