How to use
Step 1. Clean Surface – prepare your target surface clean and dry, the smoother the surface the easier to transfer the vinyl.
Step 2. Design with cutter – put on a cutting mat that has a sticky back and cut the design by cutting machines.
Step 3. Weeding the excess vinyl – leave the letters/graphics on the sheet (hook tools work well).
Step 4. Apply the transfer paper – gently put a transfer tape on the surface of the cut vinyl.
Use a scraper over the design and make sure the transfer tape is adhering to the vinyl nice and tight.
Step 5. Adhere it to the new clean and dry flat surface slowly- carefully work with delicate patterns.
Step 6. Remove Transfer paper – rub the clear tape carefully from the center out to adhere the vinyl securely.
