In clothing design, inlay glitter htv with different colors will make the design more creative and attract consumers’ attention. Here are some tips for reference.
Tip 1. Do a test before cut
Remember when working with glitter is to always test cut. This will make you not waste a large amount of vinyl. A typical test cut involves cutting a small square to test speed and pressure.
Tip 2. Try a simple design first
If you’ve never worked with glitter before, not recommended small or intricate details. Glitter is manufactured makes this product very brittle which makes weeding difficult to remove.
Tip 3. Cut out the overlap
An inlay design is done by cutting out portions of one glitter vinyl, then insert another glitter vinyl in those gaps. An inlay is necessary for textured glitter because the textured surface of the glitter does not provide a good base for the adhesive of the next glitter to stick to.
Application:
SINOVINYL® heat transfer vinyl can be widely used for heat transfer on textiles, cotton, fabric, clothing etc.
Transfer Process:
1.Make your design on cutting files.
2.Cut the film in reverse at medium pressure
3.Place the material on the garment
4.Setting the heating temperature at 150-180℃, and transfer time for 20 secs.
5.Start heating and transfering.
6.Remove polyester backing film after cooling.
FAQ:
Q: What’s the material of the heat transfer vinyl?
A: The SINOVINYL® heat transfer vinyl uses environmental friendly material, with different styles, such as: PU, PVC, Glitter, Flock, Chrome Metallic, Laser, Hologram, Reflective, Photoluminescent, Rainbow Flash.
Q: How is the washing test of heat transfer vinyl?
A: The SINOVINYL® heat transfer vinyl has 50 times approved of color fastness.
Q: How to transfer the SINOVINYL® heat tranfer vinyl on the T-shirt?
A: Transfer temperature: 150-160°C; Transfer Time:10-12 seconds; Transfer pressure: 20-30 pound; Cold peeling.
Know more about the cutting vinyl: https://www.sinovinyl.com/products/heat-transfer-vinyl/
