Many tools are used in the construction of car wrap vinyl. There are a variety of kits or suitcases. There are more than 30 wrap tools inside, which can solve various problems encountered in film construction. And these tools are specifically designed for the protection of film
and glass. According to the different use of these tools, they are divided into the following tools:
Car wrap vinyl cleaning tool
Watering can – T17
The glass cleaning solution and the liquid can be used to generate a certain pressure, spray the liquid, and adjust the spray shape.
Squeegee – SQ7 and SQ8
Remove stubborn stains and residual stickers from the glass
Buckskin sticker for squeegee – T18
Used to wipe the dirt and dust on the window frame
2. Car wrap vinyl cutting tool
Cutting scissors
It is used to cut the window film, modify the shape, and separate from the protective film. The cutting of the window film is directly carried out on the window glass. In order to accurately cut the window film without scratching the glass, it is necessary to master the correct method of holding the knife.
Utility knife – T8 and T14
Gently cut the corners that the scissors can’t reach, and use it with caution.
Measuring ruler
Used to measure the size of windows and window films for easy cutting, and need straight when cutting
3. Car wrap vinyl heating tools
Heat gun – T16
Heat the film to shrink and deform to the same shape as the glass; it can also be used to remove the paste on the glass.
Large squeegee
Scratch the window film, the window film is heated and shrunk to assist the molding; window film drainage, clean glass
4. Car wrap vinyl drainage tool
Rubber wiper – SQ11
Scratch the window film, which can be used during molding or when draining
Small squeegee
When the film is attached, the auxiliary window film is inserted into the sealing strip and completely drained.
These are the tools you need to use for basic filming. If you need other tools, please visit our website for more information.