Paint Protection Film

Home >> News

Tips For Car Window Decals Applying

Dec 06, 2022

The best option for applying decals on car windows is summer because it is easier for them to stick on the glass surface when the temperature is high. Avoid wintertime to finish this job, especially when doing it outdoors.

In such conditions, the glue can become too thick and hard, resulting in inadequate stickers adhering to the surface. However, you can solve that problem by using a hair blower. Be careful because you can overheat the surface and get stuck with broken glass in the end.

If you want to apply a company logo or your own design, you should learn the proper technique-based protocol to obtain your goal. Besides vinyl, you will also need paper towels and a bottle of alcohol. Let’s do it!

Clean The Surface
The first step is to clean the car with soap and water since the window surface needs to be clean before applying decals. Otherwise, the dirt will shorten the decal lifespan.

The next thing to do is to rub the area with alcohol and clean it with paper towels. Be aware that using towels or cloths leave threads on the surface, so it is better to avoid them.

Determining And Measuring The Place For Decal Application
After picking out the desired car window decal design, deciding where to put it is crucial. Then, it is time to find and measure an exact place to fit its dimensions.

Cutting And Transferring
It is a step that requires a cutting machine and vinyl transfer tape. You should enter the desired design into the machine’s memory and put the vinyl in the intended place.

Always have specific tools prepared to remove possible bubbles because they can shorten your decal lifespan. Finally, be careful while transferring the finished sticker to prevent ugly wrinkles.

Waiting Until The Product Dries Off
The best solution is to wait for a while after application to see whether you are satisfied with the result. It is better to avoid using a hair dryer because it can melt some decal vinyl types. As soon as you are sure that the sticker is entirely dry, you can slowly peel the transfer tape starting from one corner.

Get Free Samples