Paint Protection Film

Home >> News

How to Use Heat Press Machine

Aug 31, 2019

Heat press machines can print a wide range of surfaces, including flat heat transfer, as well as curved heat transfer for cups, plates, and hats.

Features:
color pattern is formed at one time, no need to color;
Simple operation, exquisite printing, low production cost;
The product has low loss, high added value and strong process decoration. High hiding power and strong adhesion;
It meets the green printing standards and has no environmental pollution.

How to Use Heat Press Machine

Steps
1. Plug in the power, turn on the power switch, and the power indicator will light up;
2. Adjust the thermostat to the desired temperature. After the temperature reaches the set temperature, the indication on the upper part of the thermostat is extinguished and the operation can be started.
3. Adjust the time controller to the desired time;
4. Place the garment on the lower ironing board, then put on the heat transfer paper (note the front and back of the heat transfer paper), and press the handle down firmly until the end point. Note: Do not use more than 30 kg of force, otherwise the handle may be deformed;
5. When the time controller indicating the hot stamping time expires, the buzzer sounds, that is, the handle is lifted up to the original position.

How to Use Heat Press Machine

Precautions:
1. Pressure: If the pressure is not enough or too large, adjust the pressure knob after the machine to increase the pressure in the clockwise direction; otherwise, reduce the pressure;
2. Time: When the hot stamping time arrives and the buzzer does not ring or keeps ringing, if it is not suitable, it must be adjusted to the appropriate position;
3. Temperature: When the adjusted temperature arrives, the temperature controller pointer points to the position of “180 °C” (approx. 5 minutes). If the power-on thermometer rises and the heating plate does not heat up, check the circuit.

How to Use Heat Press Machine

4. When the handle is pressed down, the hand is released and the handle is automatically raised. Please adjust the adjustment knob downwards.
5. When the hot stamping is completed and the handle is lifted up and feels difficult, adjust the adjustment knob downward.

Get Free Samples