Dry sticking
1. sticking method of small car sticker with transparent transfer film
Tools: rag, scraper or credit card
①. Clean the body and keep it dry.
②. Determine where to post. Under normal circumstances, slowly stick it on one side, scrape it flat with a tool, and peel off the bottom paper.
③. If the graphics are really small, you can also tear off all the transparent transfer film and stickers before attaching them. But you must be careful not to accidentally stick.
④. After it is stickd, scrape and press it again and again. Tear off the transparent transfer film.
⑤. Use a utility knife to draw a knife on the car door and sewing, and stick it inward.
⑥. Don’t let the car sticker and the body have any separation or protrusion.
Wet sticking
2. sticking method of large car sticker with transparent transfer film
Tools: rag, sprinkler, scraper or credit card
①. Clean the body, and evenly spray water on the body part to be stickd-to reduce the viscosity of the sticker and facilitate the adjustment of the position.
②. Determine where to post. Slowly stick it on one side, scrape it gently with a tool, and peel off the bottom paper.
③. When encountering door handles or anti-scratch strips, cut the materials and pack them in according to the situation.
④. Make proper adjustments. After confirming the approximate position of the graphics, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.
⑤. Use a utility knife to draw a knife on the car door and sewing, and stick it inward.
⑥. Don’t let the car sticker and the body have any separation or protrusion.
⑦. Try to let the moisture in the car sticker dry, and if possible, it can be heated and dried appropriately. According to the weather, wash the car again after a day or two.
