Home >> News

5 steps to learn how to use anti-slip tape?

Sep 12, 2019
Share

As we all know, the bathroom, the kitchen, the stairs are easy to slip, the most convenient way to prevent slipping is to stick the waterproof anti-slip tape to avoid accidents. However, there are still many people who don't know how to use the anti-slip tape to effectively prevent slipping. The following simple steps explain:

5 steps to learn how to use anti-slip tape?

Step 1: Make sure the anti-slip tape must be applied to a smooth surface for good results.

Step 2: Wipe the place where you want to stick the anti-slip tape, keep it dry, and do not have dust, sand or oil stains. If there is oil stain, it should be wiped off with detergent or alcohol and kept dry.

Step 3: Do not tear off the release paper immediately. Before sticking, place the anti-slip tape on the position to be pasted and measure the distance. The range of anti-slip should not be too small, and the parts that are often stepped on should be fully covered. The distance between the anti-slip tape should be 5 to 7 cm. It is too far away and has no effect. It is too close to wasting material.

5 steps to learn how to use anti-slip tape?

Step 4: Remove the anti-slip tape release paper and stick one at a time. When pasting, be careful not to leave bubbles. After sticking it, press it with your hand or scraper for 2-3 minutes to make the sticker fully adhered.

Step 5: After the anti-slip tape are fully attached, let stand for more than 12 hours, do not move, and do not touch the water.

Get Free Samples